This unit will clean the dirtiest waters.
Contains a 4 gallon tank, a sediment filter and two GAC filters, a membrane followed by another carbon filter. Comes complete with a long reach chrome faucet and tubing. 

Permeate Pump

A Permeate Pump can be added to our Reverse Osmosis Systems. It is a non-electrical device which uses only the hydraulic energy of the brine water (normally lost to the drain) to push additional purified water (i.e. “permeate”) into your pressure tank. This increased pressure allows the RO membrane to perform as if within an atmospheric tank system. Use of a Permeate Pump improves membrane life, system performance, and provides other important benefits as detailed below. With an easy to use “retrofit kit” (snap-on mounting bracket & 10-ft. of tubing), the Permeate Pump can be incorporated into almost any existing RO system. Proper installation requires horizontal mounting (i.e. with both outlet ports in the highest position) to allow any trapped air to be purged automatically.

- No electricity required, powered only by  hydraulic energy normally lost to drain.
- Improves water quality by insuring membrane  efficiency.
- Improves membrane life, prevents “TDS  creep”.
- Decreases product tank “fill time” by up to  65%.
- Reduces drain wastewater by up to 80%.
- Increases product tank pressure (up to 95% of  feed pressure).
- For all membranes rated 10 - 120 GDP.
- Effective for inlet water pressures as low as 30  PSI.
- Compact size for easy installation